Product description:

This product is used for transplanting pallet goods.

Product composition:

1. Jack-up part: The jack-up part is mainly composed of bottom frame, jack-up chain, jack-up motor, eccentric device, driving shaft, sprocket, guide device and so on. The base-type reduction motor is placed in the middle of the bottom frame, two shafts are respectively connected by bearing seats on both sides and the bottom frame, two shafts are respectively connected with the motor through a transmission chain, and each shaft and crank-arm eccentric devices with needle bearings at both ends form a jack-up structure.

2. Load shifting part: The load shifting part is composed of a guide double-chain roller table machine, which mainly includes a frame, a roller, a chain cover, a chain, a power transition device, a driving device, a guide device, a sliding plate, a pull rod, a side sealing plate and other parts.

3. Drum: The drum is a single-sided double sprocket galvanized roller, and the welded pipe is precisely rolled. Single-side double sprocket, φ20 cold-drawn carbon steel shaft, M12 internal thread and frame fixed shaft installation, bearings at both ends of the roller are Dema standard maintenance-free deep groove ball bearings. Every certain number of rollers will be provided with baffle plates, and the tray is guided by the baffle plates on the rollers, and the guide is side-guided.

4. Driving device: the reduction motor is installed on the bracket under the frame. It includes a pedestal motor with a driving sprocket. The chain connects the motor sprocket and two adjacent roller sprockets, and then the roller sprocket is connected with other driving rollers in turn through a closed endless chain.

5. Chain: 10B-1 precision roller chain conforming to GB1243 standard is adopted.

6. Leg: Welded leg is adopted, and the lower part is equipped with an adjusting foot, with adjustable height and adjustable range of 30 mm..